ANSYS Workbench: Concrete Pavement Model


Shrikant M. Harle, Prakash S. Pajgade

Abstract


Falling weight deflectometer (FWD) as well as the cores extracted from the concrete road slab were tested in the early days on plain cement concrete pavements which were laid in the Mumbai city. Before crushing the concrete cores the test of ultra sonic pulse velocity (UPV) was carried out. It was observed from the tests carried out that the deflections were within the limits set up by Indian codes as well as research carried out in other parts of world. Apart from it the concrete pavement model is also necessary to check the stresses and strain. The different components of stress and strain are observed through the graphics of software. The present paper consists of the stress, strain and deformation of the model after vehicular loads.

Keywords


ANSYS, Workbench, Concrete roads, Deformation, Principal stress, Strain.

| PDF | Video |


About this article

Title

ANSYS Workbench: Concrete Pavement Model

Keywords

ANSYS, Workbench, Concrete roads, Deformation, Principal stress, Strain.

DOI

10.20448/journal.526.2017.12.53.59

Date

2017-06-01

Additional Links

Manuscript Submission

Journal

International Journal of Modern Research in Electrical and Electronic Engineering
Vol 1, No 2 (2017) Page: 53-59

Online ISSN

2521-0181

Statistics

43 Views | 35 Downloads

Citations

0

Authors & Affiliations

Shrikant M. Harle
B.E., MTech (Civil Engineering), Assistant Professor, Department of Civil Engineering, Professor Ram Meghe College of Engg& Management, Amravati
India

Prakash S. Pajgade
B.E., MTech, PhD (Civil Engineering), Professor, Department of Civil Engineering, Professor Ram Meghe Institute of Technology & research, Amravati
India


Refbacks

  • There are currently no refbacks.